Rollei Compard Print WA Paper Developer - Agfa Neutol WA Formula - 1.2 LitersModel: 9421
NOTE: This item is classified as ORM-D. Due to shipping regulations these items can only be shipped via Ground in the Continental United States. ORM-D items cannot be shipped to PO boxes. ORM-D items are non-returnable.
Compard Print WA is a warm tone paper developer for RC and fiber-based papers. Rapid onset development, high speed yield and low fog levels are all characteristic of Compard Print WA. It creates a warm black image tone. As with Neutol Liquid WA, a special limescale stabilization prevents blurring, even at high throughput. Print WA is just as suitable for tray processing as it is for drum and roller transport processing (without replenishment). Dilution: 1 + 7 or 1 + 11 (weak dilution). Yield: up to 5 m² per liter of working solution.
The recommended water temperature for mixing Print WA is 86° F. Be sure to let the developer cool down before use. The manufacturer recommends that unused concentrate be mixed into a stock solution of 1:3 to achieve a storage life of up to 6 months when using a tightly capped, glass bottle.
- Liquid Paper Developer to achieve warm black image tones
- Dilutes 1:7, 1:11 or 1:15 for a working solution
- 1:7 dilution should be used within one week and 1:11 and 1:15 dilutions should be used within one day of preparation.
- Recommended for us with Adox MCC papers
- Replaces Agfa Neutol WA
|Chemical Type||BW Paper Developer|
|Material Safety Data Sheet||Compard Print WA Print Developer|