If you would like to be notified when this item is back in stock, please enter your email address below.
Please Note: If this product shows Out of Stock, it will be Drop Shipped directly from the vendor.
The Beseler 45MXT is the latest in a series of 45M enlargers that Beseler has been manufacturing and continuously improving for more than half a century. The triangular truss reinforced, twin-girder frame provides a rock-steady foundation for this classic enlarging system, enabling it to produce tack-sharp prints from enabling it to produce tack-sharp prints from 35mm film larger than 16 in. x 20 in. on the baseboard, enlargements up to 25 in. x 38 in. on an Adjus-Table and even larger images via wall projection. A neoprene light seal in the upper negative stage virtually eliminate stray light leakage in the darkroom.
From the onset, the 45MXT has always been a modular system, so virtually every component and accessory that fits the current enlarger will also fit every 45M enlarger manufactured since 1953. Thus the long term retained value of every Beseler 45M enlarger is enhanced by its non-obsolescence design.
Included Items
Features
Lens, lensboard, and negative carriers are not included and are necessary to use.
Special Note: All Beseler 45MXT enlargers require item #8022 Recessed lensboard when using a 50mm enlarging lens and 35mm film. This is due to a different bellows design. The standard flat Beseler lensboard #8023 or Delta Bes-Board #42245 can be used for other enlarging lenses with standard 39mm leica thread.
| Enlarger Type | B&W Condensor |
|---|
Enlarger Parts
Negative Carriers
Enlarger Parts
Negative Carriers
